Carrollton End Effector

How to Find a Robotic Welding in Carrollton ?

Whether the fabricator’s store is large or small, the Ironworker is the backbone. The Ironworker isn’t a single machine; it is five machines united into an engineering wonder. It has much more versatility than most people would imagine. The five working sections that are involved in the make-up of this machine are a punch, a section shear, a bar shear, a plate shear, and a coper-notcher.

A number of the cheaper ironworkers are constructed to employ a fulcrum where the ram shakes back and forth, building the punch go into the succumb at a small angle. This normally leads to the eroding of the punch and die on the front rims. The higher quality machines incorporate a ram which moves in a direct vertical line and employs modifiable gibs and guidebooks to insure a constant traveling path.

Vacuum Gripper

When you look for a End of Arm Tooling (EOAT)  that develop a Robotic Welding in Carrollton, looks for experience and not only pricing.

That gives more life to the tooling, and allows the punch to penetrate the succumb right in the middle in order to capitalize on the machine’s total tonnage.

When looking for a design house that designs a Robotic Welding in Carrollton  don’t look just in Michigan , other States also have great providers.

Vacuum Gripper

Emotional Freedom Technique - A Core Tool in Rapid Enlightenment

?

Emotional Freedom Technique or EFT is a form of psychological acupressure which uses tapping of the fingertips on specific areas of the body to relieve the emotional trauma of past events, addictions, pain, etc - as well, EFT is used as a powerful addition to positive affirmations. Learning EFT takes less than a minute and its contribution to mental health and happiness is nothing less than astonishing. You need not take anyone's word for it. In minutes you can learn and see for yourself if EFT really works. If you love yourself, or want to, EFT is for you!

Authors note: The main, companion article to "Emotional Freedom Technique - A core tool in Rapid Enlightenment," is "Rapid Enlightenment - A rapid guide to lifelong happiness" which is the core article introducing the simple and powerful, three step process of Rapid Enlightenment (To Recognize, Remove, and Relearn) your way to lifelong happiness. EFT is just one of the three essential components to the practice of Rapid Enlightenment.

There are many online examples of techniques and uses for EFT and further exploration is highly recommended. Included below is a simple introduction and hypothetical example of EFT in action. From this example you can use your own mind and creativity to substitute any negative feeling, memory, belief or situation that has been interfering with your happiness. So here we go...

Janet is afraid of dogs and has been since the day she was badly bitten by a neighborhood dog when she was seven. Since that day this long standing memory has caused many panic attacks when she is around, or even thinks about dogs. She often goes blocks out of her way to avoid dogs and social situations where dogs might be present. She has behaved like this for the last twenty-five years.

Janet will use EFT on the long standing memory of being bitten by the neighbor's dog. The idea is to attack the source of the suffering, in this case, the initial traumatizing event. By doing so, all of the emotions that sprang from this past event will also be affected - similar to destroying a tree by cutting out the root, rather than cutting off the tree's branches.

Using all of the senses of her mind, Janet recalls the traumatizing event. In her mind she becomes that little girl - seeing and feeling everything that little girl felt. Instantly she becomes ill at ease. She takes an emotional severity rating of the memory, of how much the memory makes her suffer. She rates it a ten. The most severe it could be. Nevertheless, she is in a safe place and knows she is only recalling the memory and it is not actually happening.

With the memory in full bloom, she begins tapping with her fingertips on the specific nerve centers listed below. The following is an example order of tapping but it can be in any order that feels most comfortable.

TAP ON ALL OF THESE KEY NERVE CENTERS (FINGER TAP THREE OR FOUR TIMES ON EACH NERVE CENTER BEFORE MOVING TO THE NEXT NERVE CENTRE):

How would you be without your fears? Without those emotions that feel so real but serve only to leave you in the many states of suffering? Eliminate suffering and fear and you eliminate the corrupted thinking that is blocking your happiness.

SOME IMPORTANT CLARIFICATIONS WHEN PRACTICING EMOTIONAL FREEDOM TECHNIQUE

There are two important clarifications regarding tapping. The first is to always remain attentive (self-aware) to tapping only negative feelings, memories, beliefs or situations. The mind has a habit of jumping from thought to thought quickly. Often our minds can jump from a negative state of suffering to a positive state of happiness without warning. When you observe this happening, stop tapping immediately! Take a few calming breaths and generally distract yourself before proceeding. For obvious reasons you do not want to tap towards the diminishing or removal of positive, emotional states.

Positive feelings, memories, beliefs or situations are those emotions that you know do not cause yourself or others to suffer. Every other kind of emotion can be considered, "ready to go!"

The second important clarification is to again remain attentive (self-aware) and to recognize the difference between a reasonable belief of danger and an unreasonable belief of danger. Tapping away our fear of any feeling, memory, belief or situation may leave your rational instincts more capable of judging the situation but it does not mean real danger no longer exists. To a large degree we are taking conscious control of your fight or flight instincts. Take this responsibility very seriously!

For example, tapping combined with misguided pride may keep you from handing your wallet or purse over to an armed thug, but by resisting you may increase the odds of the thug harming you. Your first priority is to protect your body at all costs. Having no fear combined with misguided pride or negligent thinking may jeopardize your body. But having sensible fear and sensible instincts means you exit the situation safely first, followed by the appropriate actions. In any situation, ALWAYS be aware of what you are doing! Do not get lazy, arrogant or overconfident!

Injection Moulding Machine Price

There are many different types of ergonomic garden tools. This article will cover a few of the most common ergonomic garden tools available, and will also mention a few things to look for when shopping for the tool that's right for you.

Ergonomic Hand Garden Tools

In the smaller range of ergonomic hand tools, the most common design trait is a curved handle. I've seen this design also called a radial handle. Traditional hand gardening tools force you to strain the angle of your wrist downward as you grip and push the tool into the soil. Ergonomic garden tools have a curved handle that looks like a pistol grip. This allows you to keep your wrist straight and in-line with your forearm. You than can make a much stronger fist and put more weight and strength into the tool without straining the joints or tendons of your wrist.

Another innovative design uses a straight handle shaft, about 12 inches long, that straps securely to your forearm, just below your elbow, and then uses a perpendicular grip handle at the level of your hand that you can grasp. This is a great design for individuals that have some level of disability or suffer from arthritis, because you can make use of the strength of your entire arm, distributing the weight and force throughout, instead of on your wrist and hand. You will also significantly increase the force of work you can exert on the garden tool.

1. Strength

Both the handle and tool head should be strong. Some manufacturers use a lightweight steel shaft that is coated. Others will use a professional grade fiberglass that is both lightweight and strong. Strength and weight are key to good quality ergonomic garden tools.

2. Weight

As just mentioned, weight is an important factor. There are designs that are both durable and very strong, but also light weight. You do not want to work with a heavy tool. Repetitive movements over a period of time will bring more fatigue and increase chances of injury if you use a heavy tool.

3. Quality Construction

Buying an 89 cent, two liter bottle of off-brand soda may be a good idea, but buying inexpensive, off-brand ergonomic garden tools is usually not. Cheap metals, flimsy tool attachments, weak handles, etc., are factors you need to stay away from. Pay for high quality and life-long warranties, and you will use your tools for years.

---

By Dan Fenstemaker, Inventor of the Original INTELETOOL

Mouldable Plastic

You Can Find a EOAT in Carrollton here:

 



Check the Weather in Carrollton, Michigan

Carrollton Injection Moulding

How to Find a Suction Cups in Carrollton ?

Whether the fabricator’s shop is large or small, the Ironworker is the backbone. The Ironworker isn’t a single machine; it is five machines united into an engineering wonder. It has much more versatility than most people would imagine. The five working sections that are involved in the make-up of this machine are a punch, a section shear, a bar shear, a plate shear, and a coper-notcher.

A number of the cheaper ironworkers are constructed to employ a fulcrum where the ram shakes back and forth, constructing the punch go into the die at a small angle. This normally leads to the erosion of the punch and die on the front rims. The higher quality machines incorporate a ram which moves in a direct vertical line and utilizes modifiable gibs and guides to ensure a constant traveling route.

Eoat Gripper

When you look for a End of Arm Tooling (EOAT)  that develop a Suction Cups in Carrollton, looks for experience and not only pricing.

That gives more life to the tooling, and allows the punch to penetrate the succumb right in the middle in order to capitalize on the machine’s total tonnage.

When looking for a design house that designs a Suction Cups in Carrollton  don’t look just in Ohio , other States also have great providers.

Injection Moulding Machine Price

Emotional Freedom Technique - A Core Tool in Rapid Enlightenment

?

Blacksmith Power Hammers or Trip Hammers

If you have ever worked with a power hammer you see the blacksmithing world through different eyes. Power hammers really fall into 3 basic categories, Hydraulic Presses, Mechanical Hammers, and Air Hammers. They are all designed to increase the amount of force that you can apply to the steel. This means you can do more work in a given amount of time and you can work bigger bar. Suddenly this opens a whole new creative reality with the steel.

Hydraulic Presses

I don't use one in my shop but I have used one years back in another smiths shop. Hydraulics have tons of power (literally) and can force the metal into many different shapes very effectively. They are useful for extreme controlled force applications such as forcing steel into preshaped dies, or cutting at specific lengths or angles etc.

This is not an impact machine such as mechanical hammers or air hammers, and is not fast. It can be used for drawing out steel but this is tedious. Although it would save time from drawing out by hand and allow you to work bigger bar I would go crazy with the slow process.

Essentially the machine is a hydraulic ram mounted on a frame with an electric pump. You use a foot control to squish the metal. Step with the foot apply more force. Release the foot the dies back off then you can move the bar and apply the force again in a different spot.

There are a couple of positive aspects of a hydraulic press. They have a small footprint, and require no special foundation. Prices are manageable for this type of tool. About $2000.00 in my area. There is no impact noise or vibration with this type of machine. The whine of the hydraulic pump can be loud but it doesn't have the same annoyance factor for neighbors as the impact from a hammer. Presses are rated by the number of tons pressure that the ram can produce. 20 ton, 40 ton and 60 ton are common sizes.

Most smaller blacksmithing shops use 50 lb to 150 lb size. There are two subclasses of air hammers that you should be aware of. The self contained and the air compressor version. The self contained uses two air cylinders. One is the compressor cylinder and is driven by a motor. This cylinder provides air to the hammer head cylinder. So every up stroke of the drive cylinder forces the hammer head cylinder down and every down stroke forces the hammer head cylinder up. Valving causes the air to be either exhausted or sent in varying amounts to the hammer head cylinder. This provides the control on the stroke and  force applied to the steel. This cyclic timing is governed by the speed of the electric motor.

The air compressor reliant air hammer feeds off a constant line pressure and has a feed back circuit built into the design. The hammer head travels up and trips a switch that tells it to go back down. Once it reaches a certain travel point another switch tells it to go back up. The amount of the exhaust dictates both the speed and the force applied to the steel.

Although air hammers appear to be a bit more complicated than a mechanical hammer there are actually less moving parts and less to wear out. I find them to be more versatile. You can adjust your stroke and force just by moderating your foot peddle. With a mechanical hammer you have to make a mechanical adjustment to change your stroke height. Your force is controlled by the speed of the impact or the speed of rotation.

Mouldable Plastic

This job is among one of my favorites. It’s because the entire project was mine. I started by going out to their facility and seeing their inefficiencies. One cell that they were very excited to revamp was their Silica dump cell. I was able to come up with the initial concept, quote the project for materials and labor, and then do the engineering myself. I did, not only the mechanical design and detailing, but also the electrical and pneumatic schematics. I felt in charge of the whole thing- high risk, but high reward.

A HUGE 6 axis robot (ok, not that huge, I’ve used bigger) but an R2000 robot picks up these paper bags filled with Silica. The end-of-arm-tooling (EOAT) used vacuum suction to hold onto the bag.

Solidworks Rendering of EOAT

It bring it over to a hopper, where a smaller robot uses a knife to cut the bags. The larger robot then flips it’s tooling to dump the Silica into a hopper. Seems pretty simple and for the most part it was. However, the Silica is so densely packed into the bags that even when the bags were cut wide open, the Silica wouldn’t dump. To help the Silica loosen and fall, we stick needles into the bag and blow air through these probes which moves the Silica powder around. We then (for a lack of engineering terms) flap the bag to further empty the Silica. It may sound tedious, but any powder or residue left in the bag is money wasted for the company.

An SMC slide cylinder pushed the air probes through the paper bag, and the fittings attached to the other side provided air to go through to the holes in the probe.

Another part of the project was to add a tool changer to the smaller robot. It was originally just equipped with the knife, but by adding a tool changer with a “Silica break tool” the robot was able to then go into the hopper and break up large clumps of Silica helping the contents of the hopper drain. Imagine a giant potato smasher. (Which is in fact what we ended up often calling the tool.)

Potato Smasher Robot

I had a lot of fun working with my machinist and builder on this project. I did everything I could to help them succeed, but also knew they had my back on this as well. I understand that that dynamic not all that common in the work place, so I really appreciated it. The install is happening currently and now the programmer is up to bat. The EOAT has a camera and laser to locate the bag. The camera locates the XY location of the bag and the laser the Z (height) location. I can’t wait for the tooling to be fully power, programmed, and running. I really think the customer will be happy with this addition.

Injection Molding Cost

You Can Find a EOAT in Carrollton here:

 



Check the Weather in Carrollton, Ohio